New_Heading.jpg (14742 bytes)

Momentum 49” CNC  Vertical Turning Lathe, Auto Tool Changer,
Live Tooling, Milling and Fanuc 0i-TD Controller, Model MVL-12
(Built in 2012)  Delivered in 2018
Key Capacities & Sizes
Travels:
X-Axis Travel – RAM Left / Right:
Z-Axis Travel – Spindle Up / Down:
Cross-Rail Travel (Up / Down)
Max Swing Diameter
Max Turning Diameter   
Max Turning Height     
Cross Section of RAM   
71.65”, 1,820 mm)
35.43”, (800 mm)
19.68”, (500 mm) / (3 positions / 2 steps)
63”, (1,600 mm)
63”, (1,600 mm)
47.24”, (1,200 mm)
7.87” x 7.87”, (200 x 200 mm)
Table Features
Dimensions 
Maximum Workpiece Weight     
Ram Bottom to Table Top, Max
Low Gear Table Speed   
High Gear Table Speed  
Max Table Torque 
49.2” Diameter (1,250 mm)
17,637 lbs (8,000 kg)
0 – 47.44” (1,205 mm)
34-103 PM
104 -312 RPM
9145 ft.lb (12,400 N.m)
Rapid Traverse Feedrate
X-Axis1     
Z-Axis1     
393.7 Ipm
393.7 Ipm
Floor Space
(Standard Spec) (L x W x H)  
Machine Net Weight:   
283” x 197” x 215”
51,800 lbs.
Coolant Tank Capacity  
Power Requirement
Controller – Fanuc 0i-TD with 10.4” LCD Screen
18 Gallons
480 Volt, 3 Phase, 50/60 Hz, 80 kVA
Fanuc Software:
Controlled Axis   Included
Controlled Axis, 4 axes
Controlled Axis Expansion (total) max. 4 axes
Simultaneously Controlled Axis, 4 axes
Simultaneously Controlled Axes Expansion (total) max. 4 axes
Axis Names (X, Y, Z, U, V, W, A, B, C)
Inch/Metric Conversion, G21, G20
Least Input Increment, 0.001mm/0.0001 inch/0.001°
Increment System 1/10, 0.0001mm/0.00001 inch/0.0001°
HRV Control, HRV2 & HRV3
Follow Up
Inter Lock, all axes/each axis/cutting block start
Machine Lock, all axes/each axis
Emergency Stop
Over Travel
Stored Stroke Check 1
Position Switch
Backlash Compensation, Rapid Traverse/Cutting Feed
Stored Pitch Error Compensation
Chamfering, On/Off, M22, M23
M-Code Mirror Image, M94, M95, M96
Standard Turning Spindle (MVL-12, MVL-12HS)      Included
Two Speed Gear Head
RPM Range: 0 – 312 RPM
Standard Spec: 34 ~ 312 (low: 34 ~ 103 / high: 104 ~ 312)
High Column Spec: 24 ~288 (low: 24 ~ 95 / high: 73 ~ 288)
60 / 50 HP (30 min / Continuous)
Max Torque: 9,145 ft-lb (Continuous)
Momentum-1.jpg (92373 bytes)