 |
|
| Okuma LC 50
CNC 4-Axis Simulturn Dual Turret Chucker, OPS 7000L Controls, 12/8 Turrets |
|
| Specifications: | |
| Swing Centers Control Age Main drive motor Machine Dimensions (Lx W x H) Machine weight Spindle Hole Spindle Speeds Chuck - 3 Jaw Spindle Horse Power Carriage (Z-Axis) Longitudinal Travel, UT Cutting Feedrates Rapid Traverse Speed, UT Longitudinal Travel, LT Cutting Feedrates, LT Rapid Traverse Speed, LT Cross-Slide Travel (X-Axis) Longitudinal Travel, UT Cutting Feedrates, UT Rapid Traverse Speed, UT Longitudinal Travel, LT Cutting Feedrates, LT Rapid Traverse Speed, LT Turret No. of Tool Stations, UT No. of Tool Stations, LT Bed Length of Upper Slideway Width of Upper Slideway Length of Lower Slideway Width of Lower Slideway Hydraulic Tank Capacity |
31.5
" 29.5 " OSP-7000L 2002 75 hp 125 " x 256” x 114” 41,588 lbs 6.669" (190mm) 10-1500 RPM 32" 60/75 HP 80.31" (2,040mm) .0001-39.37 IPR (.01-1000mm/rev) 393.7 IPM (10,000mm/min) N/A .0001-39.37 IPR (.01-1000mm/rev) 393.7 IPR (10,000mm/rev) 12.99+5.51" (330+140mm .0001-39.37 IPR (.01-1000mm/rev) 196.85 IPM (5,000mm/min) 10.04+.59" (255+15mm) .0001-39.37 IPR (.01-1000mm/rev) 196.85 IPM (5,000mm/min) 12 8 86.22" (2,190mm) 28.35" (720mm) 86.22" (2,190mm) 22.05" (560mm) 10.6 Gal (40 R) |
| Still
installed and under power Very Good working condition VIDEO |
|
| Catalogue Specifications. Information is believed to be correct but purchaser is advised to verify information by inspection. | |
