New_Heading.jpg (14742 bytes)

33’ x 53”, Model TR135-B2/10M, Poreba Heavy Duty Engine Lathe, SN: 7402-01-13001-07, New 1994

Specifications:
Maximum Distance Between Centers:
Swing Over Bed:
Swing Over Cross Slide:
Swing in Gap:
Length of Gap from Spindle Nose:
Bed Width:
Spindle Hole Diameter:
Spindle Nose:
Spindle Speeds: (24)
Feeds     – Longitudinal   
Cross Slide Feeds:   
Top Slide Feeds:   
Threads - Inch (61)   
Threads - Metric (62)
Cross Slide Travel:   
Tailstock Spindle Diameter    
Tailstock Travel:
Maximum Weight Between Centers Unsupported 
Maximum Weight Between Centers With (1) Steady:    
Maximum Weight Between Centers With (2) Steadies:   
Main Motor:
Approximate Dimensions:
Approximate Weight:
396"
53"
41"
65"
22"
26"
4-3/4"
A1-15
5 - 500 RPM
0.0035” - .400” TPR
0.0017 to .200 TPR
0.0008 to .100 TPR
to 60 TPI
1 – 120 mm/Rev
20-3/4”
7-1/2”, (No. 6 Morse Taper)
12"
20,000 Lbs.
22,100 Lbs.
26,500 Lbs.
55 HP
65.5’ (L) x 9.41’ (W)
42,240 Lbs.
Equipped with:

32” 4 Jaw Chuck
Live Center Built into Tailstock
Hardened and Ground Bed Ways
Coolant system
5 Roller Type Steady Rests
Power Rapid Traverse
Click for Video Click Here to Watch Video

NOTE: An effort has been made to assure the above specifications are accurate, however, it is the sole responsibility of the buyer to confirm the actual model, capacity, attachments, accessories, extras and condition. We urge buyers to inspect all machinery and equipment prior to purchase.
Poreba-1.jpg (232767 bytes) Poreba-2.jpg (223760 bytes)
Poreba-3.jpg (224087 bytes) Poreba-4.jpg (241458 bytes)
Poreba-5.jpg (234434 bytes)