New_Heading.jpg (16606 bytes)

Toshiba (Shibaura) model BSF-150A 4-Axes CNC Horizontal Boring Mill
w/40 ft of Horizontal Column Travel s/n: 520397 – Built new 1990
Specifications:
Spindle Diameter 5.905"
Section Of Ram
Length
Width
13.78"
13.78"
8.86"
Travels:
Ram Travel (Z Axis)
Boring Spindle Travel (W Axis)
Total Travel Of Ram And Spindle (Z+W)
Headstock Vertical Travel (Y Axis) "
Column Horizontal Travel (X-Axis)
29.53"
35.43"
64.96"
98.43"
40 Ft
Spindle Speeds 6 to 2,000 RPM
Feed Rates:
Minimum
Maximum
Rapid Traverse Of Ram And Spindle
Rapid Traverse Of Headstock (Y)
Rapid Traverse Of Column (X)
0.04"/Min
157.48"/Min
236.22"/Min
314.96"/Min
393.70"/Min
Thrust On Spindle
Allowable Torque On Spindle
6,600.0 LB-FT
2,026.0 LB-FT
Approx Overall Height
Approx Machine Height Above Floor
Machine Width
Machine Length
Weight Of Machine W/O Special Accessories
25.64 FT
22.30 FT
29.85 FT
51.82 FT
87,780.0 LBS
Electrical:
Tosnuc 600MB CNC Control
Power Source – AC 575 V - 60Hz
Permissible voltage fluctuation +10% / -15%
Control voltage: AC 100 V 60Hz / DC 24 V (transformer incorporated)
Primary power capacity approximately – 130 KVA
(1) Spindle motor:
VAC 30kW (40 hp) continuously, VAC 37kW (50 hp) 30 minutes

Equipped with 6' x 6' T-Slotted Rotary Table


Note: An effort has been made to assure the above specifications are accurate, however, it is the sole responsibility of the buyer to confirm the actual model, capacity, attachments, accessories, extras and condition. We urge buyers to inspect all machinery and equipment prior to purchase.

PRICE: On Location $ 299,500 NET
Catalogue Specifications.  Information is believed to be correct but purchaser is advised to verify information by inspection.

Toshiba-1.jpg (48795 bytes)

Toshiba-2.jpg (49766 bytes)

Toshiba-3.jpg (46756 bytes)

Toshiba-4.jpg (45711 bytes)

Toshiba-5.jpg (45506 bytes) Toshiba-6.jpg (51250 bytes)
Toshiba-7.jpg (52358 bytes) Toshiba-8.jpg (57527 bytes)
Toshiba-9.jpg (51531 bytes)