USI Lathe 20x120

ONE (1) NEW U.S. INDUSTRIAL 20" X 120"
PRECISION GEARED HEAD ENGINE LATHE
Model USL20120BH-KIT

This precision, heavy duty geared head engine lathe incorporates hardened and precision ground bedways on longitudinal and cross ways, and wide, precision ground gears. It has a gap-bed design, feed-rod/lead screw safety interlock system, weight bearing tailstock and forward/reverse levers at both the aprons and the head stock.

As with all U.S. Industrial lathes, it comes with a plethora of standard accessories, 3 and 4-jaw chucks, follower and steady rests, work lamp, a coolant system and an operator/service manual.

Standard Equipment: (Items below are INCLUDED with the machine):

• 12" 3-jaw chuck. Universal, self-centering with American standard tongue and groove top jaws
• 16" 4-jaw independent chuck
• 25" Face Plate
• Steady rest
• Follow rest
• Foot brake with microswitch and brake
• 17" Face Plate & Dog Plate
• 4-way toolpost
• 4-way rapid travel
• Micrometer carriage stop
• Thread Dial
• Inch/Metric reading dials on Apron, Cross-Slide and, compound
• Safety chuck shield
• Work lamp
• Taper attachment (installed)
• Flood coolant system
• Large spindle bore to pass 4"
• Traveling backsplash behind apron
• Manual with test certificate
• Slide out chip pan
• Sino 2-axis digital readout inch/metric
cable track wiring protection

Specifications and important information:
Swing Over Bed Swing Over Cross-Slide Swing Over Gap Gap Length Maximum Workpiece Length with 3-Jaw Chuck Maximum Turning Length Spindle Bore Spindle Mount Type 15 Spindle Speeds 66 Longitudinal Feeds 65 Cross Feeds 22 Metric Threads 25 Inch Threads Compound Rest Travel Cross-Slide Travel Tailstock Taper Main Motor HP Lathe Gross Weight Crated Dimensions	19.7" 11.8" 28.0" 9.44" 118" 116" 4.134" D1-11 Camlock 36 to 1600 RPM .0023 to .0937 IPR .0011 to .00404 IPR 1 to 14 mm 2 to 28 TPI 5.709" 12.205" No. 5 Morse Taper 10 HP 220/440, 3 Phase 7,700 lbs. 183" long, 40" wide, 50" tall