ONE (1) NEW U.S. INDUSTRIAL 200 TON X 13’ HYDRAULIC PRESSBRAKE
Model Number: USHB200-13
STANDARD EQUIPMENT: (All of the following comes with the machine)
• Ram Deflection Adjustment
• Mechanical Ram Depth Control
• Massive Torsion Bar or Parallelism
• Forged Heavy Duty Cylinder and Cylinder Body
• Three Speed Ram
• Rapid Approach, Bending Cycle and Rapid Retreat
• Bottom Time Delay
• All Steel Construction
• Inching, Single Cycle and Continuous Operation
• Ram takes special, heavy duty tang
• Bed Slot
• Bed also holds tooling with capture clamps
• Free Gooseneck Punch and multi-opening Die for up to 90° forming in 10 gauge mild
steel
*(see note on page 2)
SPECIFICATIONS:
| • Working Pressure | 200 Tons | • Motor Horsepower | 20 HP |
| • Length of Working Table | 157.4" | • Hydraulic Oil Capacity | 97 Gal. |
| • Distance Between Housings | 124" | • Net Weight | 28,660 lbs. |
| • Throat Depth | 12.5" | • Length | 179" |
| • Stroke Adjustment of Ram | 2.75" | • Width | 64" |
| • Ram Travel | 7.0" | • Height | 101" |
| • Open Height | 17.5" | ||
| • Backgauge Travel | 24" |
| PRICE………SUGGESTED CONFIGURATION F.O.B. MEMPHIS | $ 75,990.00 |
| CNC 2-Axis Color Graphic Control: | 4,995.00 |
| CNC Controlled Mechanical Auto Crown | 9,995.00 |
| Sick Model 4000 Light Curtain System: | 4,990.00 |
| TOTAL –Special Order, call for delivery estimate…F.O.B. Memphis | $ 95,970.00 |
AVAILABLE OPTIONS: |
|
| • CNC 2-Axis Color Graphic Control: | $4,995 |
Controls
BOTH Bend Angle and Backgauge Position. Comes with 6" LCD touch screen. Code And
Graphic programming included. Graphic allows 10 bends per program/cross-section. |
|
| • Sick Model 4000 Light Curtain System: | $4,990.00 |
| • Pilz Laser Guarding: | $8,495.00 |
| • Fiessler Laser Guarding: | $9,995.00 |
| • Third Axis (Back Gauge Height): | $4,995.00 |
| • CNC Controlled Mechanical Auto Crown: | $9,995.00 |
| • High Speed Servo Back Gauge: | $6,995.00 |
| • Training in our Memphis, TN Facility | No Charge |
| • Training at customer site, less than 300 miles from Memphis: | $2,995.00 |
| • Training at customer site, more than 300 miles from Memphis: | $3,995.00 |
(If outside continental USA, please call for quote.)
• Special Note: The Gooseneck Punch and multi-opening Die included are general purpose tools to be used for training only. Precision tooling should be purchased to meet your specific needs. The punch is segmented and it is up to the customer to calibrate these if they want to use them for a particular purpose. There is NO warranty on these items.
